20 Best production operator jobs in Highland Park, MI (Hiring Now!)

TRANSFER PRESS OPERATOR - 2ND SHIFT
E&E Manufacturing Co —Plymouth, MI
The operators are responsible for cleanliness and keeping press maintained, checking parts with calipers, and tools, setting up, loading and adjusting coil to…
Estimated: $40.3K - $51K a year
Quick Apply
Quality Inspector - Laser Tracker
Baker Industries, a Lincoln Electric Company —Macomb, MI
The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals whose access to export-controlled data,…
Estimated: $40.1K - $50.8K a year
Quick Apply
Concrete Plant Operator
Ajax Paving Industries —Troy, MI
Application Instructions: Please complete the entire online application, sign and date the relevant sections, and then submit. You will receive a…
Estimated: $43.4K - $54.9K a year
Entry Level CNC Production Operator Mid-Shift
Becker Orthopedic Appliance Co. —Troy, MI
Must have a valid driver’s license. Must have good mechanical aptitude. This job is for small batch production of metal components used in orthopedics on a CNC…
$16 - $18 an hour
Quick Apply
3d
CNC Lathe Operator-Hard Turning
Penn Engineering —Westland, MI
This position requires the ability to set-up, operate or tend to hard turn grinding and related tools for the Mazak CNC Hard Turn operation.
Estimated: $36.5K - $46.3K a year
14d
Forklift Operator
Pak-Rite Industries —Ecorse, MI
Minimum of 2 years’ experience driving a sit-down forklift in a warehouse setting preferred. Flexible to cross-train in other areas and go where the needs is…
$18 an hour
Quick Apply
Machinist
Ingersoll Rand —Madison Heights, MI
Positions and secures deburring and cutting tools onto holding fixtures of machine, using hand tools. Manually deburrs pans that have been machined using air…
$22.96 - $24.95 an hour
14d
EDM Operator
Delta Research —Livonia, MI
Familiarity with lean manufacturing and continuous improvement techniques is helpful. Familiarity with lean manufacturing and continuous improvement techniques…
Estimated: $37.6K - $47.6K a year
Quick Apply
Deburr Operator
Delta Research —Livonia, MI
Remove of all loose/hanging metallic burrs using assorted powered and non-powered abrasive tools. Maintain tools, gages, and equipment in a clean, orderly and…
Estimated: $39.8K - $50.4K a year
Quick Apply
2nd Shift Production Supervisor
Emerging Advanced Products, LLC —Van Buren, MI
182,000 square foot manufacturing facility for body structures, stamping & assemblies, modular assemblies - FEM, seating structures & components, powertrain &…
$60,000 - $75,000 a year
Quick Apply
Line Operator
Fintex, LLC —Romulus, MI
Facility with basic hand tools (wrench, screw driver, allen wrench, etc.). Metal finishing company specializing in automotive performance coating is seeking…
$19.00 - $19.50 an hour
Quick Apply
2d
Print Press Setup Technician, 2nd Shift
Fortis Solutions Group, LLC —Novi, MI
As the setup technician, you will assist press operator during job runs, with troubleshooting, to include dies, cleaning and remounting press plates, and…
Estimated: $37.7K - $47.7K a year
Quick Apply
3d
Production Shop Machine Operator
Fairlane Products —Fraser, MI
As a key member of our production staff, you will receive training and support from experienced leadership, other team members and state-of-the-art computer…
From $16 an hour
Quick Apply
12d
CNC Machine Operator
LOC Performance Products, Inc. —Plymouth, MI
Loc Performance Products, LLC provides full services for complex mechanical products, fabricated structures and systems that range from complete design services…
Estimated: $34.1K - $43.2K a year
6d
Quality Manager
J. G. Kern Enterprises Inc. —Sterling Heights, MI
Company Overview:* JG Kern is a world class facility that manufactures close tolerance components for drivetrain and powertrain assemblies, chassis frames and…
$100,000 - $140,000 a year
Quick Apply
5d
CNC Operator
Penn Engineering —Shelby Charter Township, MI
Create tool paths from product data and design engineering inputs. Be able to properly use precision measuring tools, i.e., micrometers, air gauges, dial bore…
Estimated: $43.6K - $55.2K a year
6d
Production Operator
Niagara Bottling —Shelby Charter Township, MI
Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Demonstrates adaptability by reacting appropriately…
$20.24 - $20.25 an hour
Quick Apply
Lathe Machinist / Operator
Greening, Inc —Detroit, MI
Read and interpret engineering drawings and blueprints. Strong knowledge of reading engineering drawings and blueprints. High school diploma or equivalent.
$25 - $30 an hour
Quick Apply
Heat Treat Furnace Operator
Fire Rite —Detroit, MI
Strong mechanical aptitude and ability to use hand tools effectively. Basic computer skills for data entry and equipment monitoring.
$20 - $24 an hour
Quick Apply
Manual Machinist - Mill & Lathe - 1st Shift - $24 and Up
MeritHall Inc —Garden City, MI
Must own basic tools of the Trade. In this position, you will help us create tools and other components using a variety of equipment, such as a Manual Lathe,…
$25 - $30 an hour
Quick Apply
9d

I want to receive the latest job alert for production operator in Highland Park, MI

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

TRANSFER PRESS OPERATOR - 2ND SHIFT

E&E Manufacturing Co - Plymouth, MI

Quick Apply

Job Details

Estimated: $40.3K - $51K a year

Benefits

Disability insurance
Health insurance
Dental insurance
401(k)
Vision insurance
Gym membership
Life insurance

Qualifications

Tooling
Calipers
High school diploma or GED
Plasma cutting
Computer skills
Welding
1 year
Crane
Leadership
Communication skills
Sensors

Full Job Description

Role Description:

Operators will set up and operate Transfer Press equipment to customer-supplied specifications while maintaining production by planning and organizing jobs and continuously monitoring quality. The operator will operate a machine which creates quality parts stamped out from steel coil. The operators are responsible for cleanliness and keeping press maintained, checking parts with calipers, and tools, setting up, loading and adjusting coil to produce parts to customer specification.

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

Examines finished stamping pieces to verify conformance with specifications according to operator inspection sheet, quality control plans and/or customer notes using instruments such as gauges.
Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.
Ability to run progressive and transfer dies.
Ability to run crane.
Ability to park and unpark transfer bars.
Troubleshooting skills.
Manually adjust transfer finger adjustments.
Pre-stage own die.
Knowledge of GMS system.
Ensure compliance with corporate and plant safety standards.
Basic understanding of computers and ability to perform computer functions as they pertain to the job.
Ability to read and interpret documents such as blueprints, welding symbols, operating and maintenance instructions and procedure manuals.
Demonstrated detail orientation, self-motivation skills and ability to multi-task.
Competent at basic dimensional measuring and able to quickly learn the use of precision measurement tools.
Demonstrated ability to effectively implement or respond to change.
Working safely as a condition of employment.

Die Setting Skills:

Q.D.C. Leader Q.D.C.
Tool room system training

Understanding Press System:

Proper use and operation of tonnage monitors
Proper use and operation of P.L.C.'s
Proper use and adjustment of Die Protection Devices
Limit Switches
Sensors

Understanding of Press Line Components:

The press, slide, clutch, and counter balances
The Feeder: strengtheners, pilot pin, grippers and air valves
The Coil Box: Pinch rollers, chain drive and control box
Conveyor system set-up

Safety Program:

Proper use and instruction of Power Lockout procedure
Light curtain setup, calibration and adjustment
Barrier guard adjustment
Proper use and instruction of Dual (Two Hand) Control Procedure
Proper use of the Die Setters Safety Setup Check Off List

Documentation:

Setup time
Equipment Maintenance Check List
Plex
Production paperwork
Die Summary
Q.D.C. Paperwork

Die Operation:

Tune in a proper starting procedure for job.
Knowledge of using Setup stop blocks to set shut heights
Have the ability to set tooling heights and clearances.
Properly adjust and set progression, feeder heights, air pressure and that all controls are set for that job.
Poka Yoke

Intangible Skills:

To be able to communicate with the tool room on repairs and improvements needed on the dies
Knowledge of the tool crib procedures and perishable tooling
Have the ability to train others
Exhibit leadership abilities.
Take the initiative, "Be that go to person" for those in your room or on your shift.
Have the ability to recognize when tool room assistance is needed
Be a highly motivated person

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

High School Diploma or GED

Experience:

One to five years of related Transfer Press experience and or training.
Welding, Laser Cutting, Plasma Cutting, and or Water Jet Cutting background also a plus.

Certifications:

None

Additional Skills Required:

To effectively carry out duties and responsibilities in the job position the following skills are required:

Computer skills:

Experience with basic computer systems.

Communication skills:

Speak effectively with fellow employees.
Read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, etc.
Interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Mathematical skills:

Ability to work with mathematical concepts such as fractions, percentages, ratios, and proportions to practical situations.

Other Skills:

Detail oriented.
Organized and able to meet deadlines while performing multiple duties.
Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

#EEMFG123

Quick Apply

production operator jobs in Highland Park, MI

TRANSFER PRESS OPERATOR - 2ND SHIFT

Quality Inspector - Laser Tracker

Concrete Plant Operator

Entry Level CNC Production Operator Mid-Shift

CNC Lathe Operator-Hard Turning

Forklift Operator

Machinist

EDM Operator

Deburr Operator

2nd Shift Production Supervisor

Line Operator

Print Press Setup Technician, 2nd Shift

Production Shop Machine Operator

CNC Machine Operator

Quality Manager

CNC Operator

Production Operator

Lathe Machinist / Operator

Heat Treat Furnace Operator

Manual Machinist - Mill & Lathe - 1st Shift - $24 and Up

Job Seeker Tools

Employer Tools

Browse

Stay Connected