20 Best raytheon jobs (Hiring Now!)

Lead Engineering Support Technician - Onsite
Raytheon —Tucson, AZ
Work includes Engineering prototyping, field service, and repair of returned materials. Replace mechanical and electrical components.
$48,000 - $116,000 a year
8d
Section Lead - Batteries
Raytheon —Tucson, AZ
Experience in One-Shot component designs, ability to evaluate performance data, capable of evaluating MIL-DTL-23659 compliance, and creation of technical data…
$96,000 - $200,000 a year
10d
Principal Telemetry & Flight Termination Systems Section Lead
Raytheon —Tucson, AZ
EPAD as a whole is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round…
$96,000 - $200,000 a year
Custodian
Raytheon —Tucson, AZ
This occupation requires sweeping, vacuuming, dusting, waxing, polishing, mopping, scrubbing, removing trash, and other duties necessary to maintain good…
Estimated: $27.7K - $34.1K a year
Quick Apply
Senior Systems Engineer - SI&T
Raytheon —Tucson, AZ
Identify areas of high technical risk, collaborate with the team to define development priorities, and develop test plans to mitigate technical risk.
$77,000 - $163,000 a year
2d
Mechanical Engr, Senior, Controls and Actuation
Raytheon —Tucson, AZ
You will be expected to apply sound mechanical engineering principles to solve complex system problems while teaming with a cross-discipline team including…
$77,000 - $163,000 a year
Principal Electrical Engineer - Test Equipment
Raytheon —Tucson, AZ
Experience with commonly used electrical engineering design and analysis tools including but not limited to: Altium, DX Designer, Mentor Capital, Creo Schematic…
$96,000 - $200,000 a year
Depot Engineer (ONSITE)
Raytheon —Chambersburg, PA
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or…
$53,000 - $103,000 a year
Mechanical Assembler I - 3rd Shift (Onsite)
Collins Aerospace —Decorah, IA
Under close supervision, inspects own work performed to ensure a quality product which conforms to workmanship standards, engineering requirements and design…
$18 an hour
Assembly Operator - 3rd Shift (Onsite)
Collins Aerospace —Coralville, IA
Achieve special process certification where applicable. Understand and use computer tools such as SAP and accurately follow work instructions.
Estimated: $40.9K - $51.8K a year
2d
Principal Environmental Test Engineer
Raytheon —Tucson, AZ
The Principal Test Engineer will be responsible for performing planning, vehicle design, development, build, integration verification, and field/flight test…
$96,000 - $200,000 a year
Information Systems Engineer II- ONSITE
Raytheon —Tucson, AZ
We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced engineering systems in the…
$64,000 - $128,000 a year
Thin Films Process Engineer
Raytheon —Goleta, CA
The candidate will provide guidance to a staff of energetic engineers and skilled technicians to develop strategies for advanced coating technologies.
$85,000 - $179,000 a year
6d
Mechanical Assembler II - 2nd Shift (onsite)
Collins Aerospace —Simpsonville, SC
Plans and performs a variety of mechanical or electro-mechanical assembly, tests, fabrications, and inspection operations on various products in standard and…
Estimated: $39.1K - $49.5K a year
2d
Senior Reverse Engineer/Vulnerability Researcher
Raytheon —Huntsville, AL
A University Degree or equivalent experience and minimum 5 years prior relevant experience, or An Advanced Degree in a related field and minimum 3 years…
$77,000 - $163,000 a year
Customer Dedicated Driver (Temp)
Raytheon —Andover, MA
Valid and Active Class D Driver’s license. Experience with driving customers of a Very Important Person (VIP) Status.
Estimated: $49.3K - $62.5K a year
4d
Environmental Test Sr. Support Engineer
Raytheon —Tucson, AZ
Environmental testing includes mechanical shock, electrodynamic vibration, salt fog, climatic environments such as temperature, altitude, and humidity, high…
$64,000 - $128,000 a year
Master Technician, Manufacturing Operations Test (PART TIME)
Raytheon —Goleta, CA
Reviews field support requirements and recommends tools and test equipment to engineering. Previous experience working in a technical field, around ESD…
$64,000 - $137,000 a year
1d
Leadership Development Program - Digital Early Career (Starts June 2025)
Raytheon Technologies Corporate Headquarters —Arlington, VA
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or…
$52,000 - $124,000 a year
9d
Materials Associate IV - Cycle Count Controller, 1st Shift
Collins Aerospace —Wilson, NC
You will develop skills in maintaining and overseeing inventory levels through regular cycle counts, audits, and adjustments. Hours: (7 AM – 3:30 PM).
Estimated: $51.9K - $65.8K a year
2d

I want to receive the latest job alert for raytheon

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Lead Engineering Support Technician - Onsite

Raytheon - Tucson, AZ

Apply Now

Job Details

Full-time $48,000 - $116,000 a year 8 days ago

Benefits

Disability insurance
Health insurance
Dental insurance
Flexible spending account
Paid time off
Parental leave
Employee assistance program
Vision insurance
401(k) matching
Flexible schedule
Life insurance

Qualifications

J Standard Certification
Fabrication
Soldering
Ohmmeter
8 years
Assembly
IPC-610 Certification
Manufacturing
Associate's degree
Cabling
Hand tools
Mechanical knowledge

Full Job Description

Date Posted:

2024-05-01

Country:

United States of America

Location:

AZ201: RMS AP Bldg 801 1151 East Hermans Road Building 801, Tucson, AZ, 85756 USA

Position Role Type:

Onsite

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Department Role

Our Effector Power and Analog Design department is looking for a Lead Engineering Support Technician. A Lead Engineering Support Technician is responsible for the building, installing, troubleshooting, repairing, and inspecting Engineering circuit card assemblies, cable, and harness systems. Work includes Engineering prototyping, field service, and repair of returned materials. Candidates will be able to rework and modify Engineering micro-sized components on CCAs, prototype sub-assemblies, completed assemblies, cables, and harness systems per Engineering drawings, schematics, or work instructions.

The successful candidate will demonstrate the skills and knowledge required to effectively and efficiently repair or replace defective Engineering micro-components and wiring to ensure installations meet Engineering conformity. This individual will demonstrate effective cable and harness repair techniques using acceptable practices including splicing, crimping, soldering, and pinning of wiring. The candidate will ensure that all work performed is properly and completely documented and ready for use. Verification and inspection may be required, and candidate will need to be able to identify and document findings per authorizing protocols. The candidate will also provide on-the-job recommendations in solving hardware integration issues with mid and upper-level Engineering and Leadership. The candidate will comply with the company’s FOD program, tool control program and all safety regulations. The candidate may perform duties at various company locations.

What You Will Do

Modify, rework, and populate Engineering CCA’s, assemblies, and subassemblies to ensure proper operation per established criteria. Perform required repairs to returned and damaged units to an operational state. This includes:

Micro-soldering under a microscope for an extensive period.
Build cables and harnesses from schematics.
Quality verification and inspection under a microscope
Identify, repair, and replace wire harnesses and cable assemblies.
Replace mechanical and electrical components.
Operate multi-meters or basic ohmmeters to conduct point-to-point current connection.
Recognize failures, isolate problems, and suggest appropriate corrective action.
Keep management appraised of potential problems or identified risks that may negatively affect program schedule or quality.
Provide support and feedback to the Engineering development team.

Qualifications You Must Have

Associate degree with a minimum of 8 years relevant experience
Experience with Solder, mechanical, quality standards, processes, and/or documentation.
Verification and inspection experience with associated standards, processes, and/or documentation.
Experience with cable and harness assembly, fabrication, and/or rework.
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

CCA manufacturing experience and associated fabrication standards, processes, and documentation.
IPC J-STD-001 solder certification.
IPC 610 and 620 acceptability certification and inspection experience.
Motivated self-starter with the ability to use good judgement and work independently or collaboratively.
Ability to perform quality work within a fast-paced Engineering technical support environment.
Solder rework equipment to include reflow oven, mini-wave, pre-heater, hot air pencil, and de-solder tools.
Ability to work with fabrication processes such as bonding, cleaning, coating, and mechanical fasteners.
Ability to read and comprehend work instructions, short correspondence, memos, schematics, detailed electronic blueprints, and other similar authorized drawings and documents.
Ability to establish customer priorities and manage multiple tasks successfully.
Must have experience using hand tools such as soldering iron, cutters, wire strippers, and electric heat gun.
Assembly, fabrication, and rework experience of micro-size components on circuit card assemblies.
Existing secret security clearance.

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
If applicable/optional - Relocation Eligibility

Learn More & Apply Now!

RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation – and that, in turn, requires a culture that is diverse, equitable and inclusive.
We embrace individuality and diversity of thought to fuel opportunity for our employees, our customers, and our communities. We work toward progress, knowing that a more inclusive world is critical to our mission. Not just in this moment, but always.
Please consider the following role type definition as you apply for this role. (Select the one that fits the role type of the req)
- Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm
Location Info and/or Links:
Tucson, AZ: https://careers.rtx.com/global/en/raytheon-tucson,-az-location

The salary range for this role is 48,000 USD - 116,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.

Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.

Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.

This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.

RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Apply Now

raytheon jobs

Lead Engineering Support Technician - Onsite

Section Lead - Batteries

Principal Telemetry & Flight Termination Systems Section Lead

Custodian

Senior Systems Engineer - SI&T

Mechanical Engr, Senior, Controls and Actuation

Principal Electrical Engineer - Test Equipment

Depot Engineer (ONSITE)

Mechanical Assembler I - 3rd Shift (Onsite)

Assembly Operator - 3rd Shift (Onsite)

Principal Environmental Test Engineer

Information Systems Engineer II- ONSITE

Thin Films Process Engineer

Mechanical Assembler II - 2nd Shift (onsite)

Senior Reverse Engineer/Vulnerability Researcher

Customer Dedicated Driver (Temp)

Environmental Test Sr. Support Engineer

Master Technician, Manufacturing Operations Test (PART TIME)

Leadership Development Program - Digital Early Career (Starts June 2025)

Materials Associate IV - Cycle Count Controller, 1st Shift

Job Seeker Tools

Employer Tools

Browse

Stay Connected